Suggested Division 15 Specifications Heavy Duty - 301 Series Steel Supply Grilles Model Description 301RS-HD Heavy Duty Steel supply grilles shall be TITUS Model 301R-HD (single deflection) of the sizes and mounting types shown on the plans and outlet schedule. The deflection blades shall be available parallel to the short dimension of the grille. Construction shall be of steel with a 1¼-inch wide border on all sides and a minimum border gauge of 18. Screw holes shall be countersunk for a neat appearance. Corners shall be welded with full penetration resistance welds. Front deflection blades shall be 14-gauge steel, adjustable from 0°- 40°, and spaced on ½-inch centers. Rear deflection blades (if applicable) shall be 26-gauge steel spaced on ¾-inch centers. Optional opposed-blade volume damper shall be constructed of heavy gauge steel. Damper must be operable from the face of the grille. The grille finish shall be #26 white. The finish shall be an anodic acrylic paint, baked at 315° F for 30 minutes. The pencil hardness must be HB to H. The paint must pass a 100-hour ASTM B117 Corrosive Environments Salt Spray Test without creepage, blistering or deterioration of film. The paint must pass a 250-hour ASTM D870 Water Immersion Test. The paint must also pass the ASTM D2794 Reverse Impact Cracking Test with a 50-inch pound force applied. The manufacturer shall provide published performance data for the grille. The grille shall be tested in accordance with ANSI/ASHRAE Standard 70-1991.